1Description:

DTD-25 Digital Display Thermostat Dissolver Digestion Principle: Lɔ̈ɔ̈m de sampol ku liquor de digestion në tubu de digestion, ku jɔl ya digestion në thermostatic state, ku jɔl ya sampol de digestion ka bɛ̈n ya luɔ̈ɔ̈i në instrumental analysis ku chemical analysis. Digestive Samples Range: Samples, various water samples, biological samples (blood, urine, hair), cosmetics, etc.

II: Parameters teknikal:

(1) Temperature control range: room temperature -300°C (special description: temperature refers to constant temperature block temperature, dissolved sample liquid temperature and digestive liquid boiling point*).

(2) Tɛmɛ tɛmɛ: ≤1°C.

(3) Digestion holes number: 18 holes, hole diameter: Φ26mm, suitable for external diameter Φ25mm digestion tubes. (3) Digestion holes number: 18 holes, hole diameter: Φ26mm, suitable for external diameter Φ25mm digestion tubes.

(4) Puɔth ye kɔɔr: 1500W

(5) Temperature control method: Microcomputer PID control, dual screen LED display, clear and intuitive.

(6) Wakat: 1-9999 minit

II. Reagents ku käke:

(1) Liquid digestive: nitric acid + high acid (4: 1)

(2) Plastik pins wala bamboo clips: ye luɔ̈ɔ̈i bï yɔ̈ɔ̈r në 10% nitrate ye looi në kɛ̈ɛ̈r ye looi në kɛ̈ɛ̈r ye looi në kɛ̈ɛ̈r ye looi.

(3) Digestion tube: diameter Φ25 × length 80 (mm) flat low hard glass, before digestion, digestion tube be dipped with 10% nitric acid throughout the night, wash clean and dry or dry after use.

3. Sample dissolution method: Sample dissolution method: Sample dissolution method: Sample dissolution method: Sample dissolution method: Sample dissolution method: Sample dissolution method: Sample dissolution method:

1. Sample ye cam:

(1) Lɔ̈ɔ̈m kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ kɔnɔ.

(2) Sample of liquid (such as white wine, pure water, natural water etc.) take 1-10.0ml (sample to the digestive tube, add three glass beads) put the digestive tube into the solvent at 120°C heated to near dry, add 1.0ml (digestive liquid at 240°C constant temperature dissolved to near dry, remove the cold, set a certain volume to measure).

(3) Mïïth ye kek cam (cït mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye kek cam, mïïth ye

(4) Mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye mïïth ye m

2, Pii ye cɔl:

1.00-10.0ml sample to the digestive tube, add three glass beads, put the digestive tube into the digester at 120°C heated to near dry, add the digestive agent (clean water to 0.50ml digestive agent, wastewater to 2ml digestive agent) 240°C constant temperature dissolved to near dry and removed cold, settling a certain volume to measure.

3, Sample dissolution:

0.200g sample to digestive tube add three glass beads add 5.0ml digestive liquid to the digester 160°C digest 30min.240°C constant temperature dissolve to near dry, remove the cold, settle to a certain volume to measure. 0.200g sample to digestive tube add three glass beads add 5.0ml digestive liquid to the digester 160°C digest 30min.240°C constant temperature dissolve to near dry, remove the cold, settle to a certain volume to measure.

4、Kosmetik ye looi:

Tïŋ 0.100-0.200g cosmetics në tubu de digestion, ku lɔ̈ɔ̈ŋ ke 5-10ml de liquor de digestion, ku lɔ̈ɔ̈ŋ ke 1-2h në 160 ℃ hanga lɔ̈ɔ̈ŋ ke 240 ℃ ya cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk

4. Luɔi

1, kä ye kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ̈n yenë kek tɛ

2, kä ye kek tïŋ në tɛ̈n yenë kek tïŋ në tɛ̈n yenë kek tïŋ në tɛ̈n yenë kek tïŋ në tɛ̈n yenë kek tïŋ në tɛ̈n yenë kek tïŋ në tɛ̈n yen A tɛmɛ 160°C

5. Ye luɔɔi:

Lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ, lɔ̈ɔ̈m kɔnɔ

DTD-25 ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

Click "Setting" button, go to the temperature setting state, show the window bottom row showing the prompt "SP", the top row showing the temperature setting value (first bit value flashing), you can change the desired setting value by shifting, increasing, reducing keys. Go click "Setting" button to enter the thermostat time setting state, show the window bottom row showing the prompt "St", the top row showing the thermostat time setting value (first bit flashing), you can change the desired setting value by shifting, increasing, reducing keys. Go click "Setting" button to enter the thermostat time setting state, show the window bottom row showing the prompt "St", the top row showing the thermostat time setting value (first bit flashing), you can change the desired setting value by shifting, increasing, reducing keys. Lɔ̈k "Settings" button, ka bɛ̈n looi, ka bɛ̈n ya tɔ̈ɔ̈u, ka bɛ̈n ya tɔ̈ɔ̈u, ka bɛ̈n ya tɔ̈ɔ̈u, ka bɛ̈n ya tɔ̈ɔ̈u.

Na ye thaa tääu "0", ka tɛ̈n ye thaa tääu, ka tɛ̈n ye thaa tääu, ka tɛ̈n ye thaa tääu, ka tɛ̈n ye thaa tääu, ka tɛ̈n ye thaa tääu, ka tɛ̈n ye thaa tääu; To a tɛmɛ thaa ka tɛmɛ "0", a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ a tɛmɛ

Can customize liquid crystal thermometer, multi-stage program temperature control resolver according to requirements