Parameters teknis:
Model: YX-60
Brand: Shanghai Yichuan Instrument Factory SYCIF
测量范围：0.1，0.16，0.25，0.4，0.6，1，1.6，2.5，4，6，10，16，25，40，60，100
Kɛnɛya: 2.5
Kɔmpiye: 14 × 1.5, 10 × 1
Voltage de luɔi dɔ̈ŋ ku jɔl ya tɛ̈n yenë yen tɔ̈u thïn: YX-60/100/150 220V.DC 380V.AC 10VA
Kä ye kek looi në ɣän kɔ̈k yiic: -40 ~ + 70 ℃, kë ye kek looi në ɣän kɔ̈k yiic ka cɔk 85%.
Temperature effect: When the actual use of temperature is high +20±5°C, its indicative value added error is not greater than 0.4%/10°C, the setting point bias is not greater than 0.6%/10°C.
Kuen: 75

Luɔi:
1.The electric contact pressure meter is suitable for measuring the pressure of liquids, gases and other media that do not corrode copper and copper alloys. The electric contact pressure meter is suitable for measuring the pressure of liquids, gases and other media that do not corrode copper and copper alloys. A ye tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ.
2.The instrument has to be carefully checked the model, specifications and check if the indication pointer is located at zero, before installing. If the model is not compatible or the pointer deviates from zero, it has to be replaced or checked again after finding why.
3.The instrument has to be installed in the surrounding environment (or medium) temperature of -40~+70°C, relative humidity not greater than 85%, vibration or measured pressure of sharp pulse pairing point reliable work and correct readings etc. without affecting the environment. 3.The instrument has to be installed in the surrounding environment (or medium) temperature of -40~+70°C, relative humidity not greater than 85%, vibration or measured pressure of sharp pulse pairing point reliable work and correct reading etc. 3.
4.The instrument has to be installed vertically, and try to keep the same horizontal position between the pressing point, or else, it has to be counted accordingly as additional errors caused by liquid level differences. 4.The instrument has to be installed vertically, and try to keep the same horizontal position between the pressing point, or else, it has to be counted accordingly as additional errors caused by liquid level differences.
5.After the electric line of the instrument has been set up and finished, it should be carefully checked, and made a test operation before it can be put into use. 5.After the electric line of the instrument has been set up and finished, it should be carefully checked, and made a test operation before it can be put into use.
6.To ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈
7. ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈ Na ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n Ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ
8. A tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë a tɛ̈n yenë
9.The instrument in the normal use case, should be checked periodically, generally by checking once every three months. 9.The instrument in the normal use case, should be checked periodically, generally by checking once every three months. 9.The instrument in the normal use case, should be checked periodically, generally by checking once every three months. Na ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ
10.After long use of the instrument, if you find that the coupling action error has increased, or contact reliability is poor, you can adjust the small electric connector device's magnetic column to the conductor needle distance, to adequately increase the magnetic force, if you confirm that the magnetic column has basically declined, then it should be removed after replacement.
11.When the instrument is used or repaired, the wire (ground) wire terminal wire that leads to the connecting box should be reliably connected to ensure safety.When the instrument is used or repaired, the wire (ground) wire terminal wire that leads to the connecting box should be reliably connected to ensure safety.