Product Introduction:

BA-PWGZ3000 nitrogen closed circuit spray dryer is a model for organic solvent, harmful materials for spray drying, the material contained in the organic solvent concentration too high, flammable explosive or material suitable oxidation case, the machine uses nitrogen instead of dry spraying system air, nitrogen through filter device, multi-stage condensation device after cycle closed use, thus determining the safety during the experiment process, can also let the sample not be oxidized, finish the drying collection process

Karakteristik produk:
1. Nitrogen gas closed loop, save gas usage, ensure experimental safety, prevent sample oxidation
2.High precision oxygen measurement system, according to high and low oxygen concentration automatic control of feeding start and stop, improve the safety of the experiment.
3.Sensitivity pressure measurement system and automatic pressure release, improve the safety of space pressure
4.High efficiency filtration system, reducing the material loss after drying. 4.High efficiency filtration system, reducing the material loss after drying. 4.High efficiency filtration system, reducing the material loss after drying. 4.High efficiency filtration system, reducing the material loss after drying.
5. Multi-stage needle hole solvent condensation system, ka juak solvent recovery rate
6. wɛ̈t juëc tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
7.Frequency fan ye waar, ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl
8.Jacket type heating system, reduce pipeline heat dissipation, temperature control precision high, and also improve the safety of high temperature machine. 8.Jacket type heating system, reduce pipeline heat dissipation, and also improve the safety of high temperature machine. 8.Jacket type heating system, reduce pipeline heat dissipation, and also improve the safety of high temperature machine.
9. Drying tower vortex separator aye detachable cleaning, solving the tough cleaning temperature
10.7 inch LCD touchscreen, temperature curve memory function, real-time monitoring, machine whole stainless steel material
11.Can opt for own nitrogen generator, reducing the frequency of nitrogen cylinder use. Can opt for own nitrogen generator, reducing the frequency of nitrogen cylinder use. Can opt for own nitrogen generator, reducing the frequency of nitrogen cylinder use.

Parameters kä:
Lɔ̈ɔ̈m ye lɔ̈ɔ̈m: lɔ̈ɔ̈m ye lɔ̈ɔ̈m ye lɔ̈ɔ̈m ye lɔ̈ɔ̈m ye lɔ̈ɔ̈m ye lɔ̈ɔ̈m ye lɔ̈ɔ̈m
Lɔ̈ɔ̈i: Lɔ̈ɔ̈i-200°C (±0.5°C)
Lɔ̈ɔ̈i ye cɔl condensation temperature: -5 to 30°C (±0.5°C)
Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
Lɔ̈ɔ̈i: 50-2000ml/H
Foaming Mode: Dual Fluid Mode
Oxygen measurement system detection range: 0-100% (accuracy 0.1)
Oxygen Detection Module: Ensure oxygen concentration below 3% before starting feeding (value can be set arbitrarily) Oxygen Detection Module: Ensure oxygen concentration below 3% before starting feeding (value can be set arbitrarily)
Ajuiɛɛr ye kɔɔr: (0-100) Kpa
Module anti-explosion: ka ca 0.02MPA automatic leakage pressure (ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ)
Film anti-explosion: awtomatik
Ajuiɛɛr de riɛl: 0-30m³/h Ajuiɛɛr de riɛl (Ajuiɛɛr de riɛl)
Dɔɔr dɔɔr: φ20*H40mm
Filtr recycling size: φ17*H58mm
Dɔɔr de condensateur: φ17*H88mm
Masin dɔ̈ŋ: 100*96*118mm