The electrode is made of low impedance glass film, can be used in various conditions of PH measurement, with quick response, thermal stability good characteristics: has good reproducibility, not easy hydrolysis, basically eliminates alkali error, 0 ~ 14PH range presents linear potential values, Ag / Agcl and gel electrolyte salt bridge composed of reference system has stable half battery potential and excellent anti-pollution performance, circular polytetrafluoroethylene diaphragm is not easy to block, can be long term online detection.


Kuɛl: 0~14PH Kuɛl: ≤0.02PH
A tɛmɛ: 0 ~ 90 ℃ A tɛmɛ: ≤10sec
Drift: ≤0.03PH/24hours Sensitive film impedance: ≤200×106Ω
Kä ye looi: 3/4 inch thread, 3 ~ 5 m cable (lëu bï ya juak 60 m ka cïn amplifier ye), Y terminal wala BNC connection, kä juëc ye looi.
Lɔ̈ɔ̈m: A tɛ̈n yenë kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc

Luɔi kɛnɛ tɛmɛ

1, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka

2, electrode front end ye bɛ̈ɛ̈r ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble.

3, pole socket adhil tɔ̈ɔ̈u ka cɛ̈ɛ̈r ku ka cɛ̈ɛ̈r, ni ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka

4, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ

5, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ

6, electrode after long use will produce passivation, its phenomenon is sensitive gradient reduced, response slow, reading incorrect, at this time you can immerse the electrode bottom ball with 0.1M * 24 hours, (0.1M * formulation: 9ml hydrochloric acid with distilled water diluted to 1000ml), then use 3Mkcl solution to immerse for hours, or to immerse the electrode bottom end in 4% HF (hydrofluoric acid) for 3~5 seconds, wash with distilled water, then immerse in 3Mkcl solution for hours to restore its performance.

7, glass bubble pollution or liquid interface blockage, will also cause the electrode to be passive, at this time, should be cleaned according to the nature of the polluting substance, with a suitable solution, see the detailed table below. (Kɛ kui raan)

Kɔɔr: Kɔɔr:

Oxide metal inorganic ka tɔ̈u 1M *

Organic oils detergents (low alkaline) ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

Polymer resin ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye

Protein blood cell sediment Acidase solution (cït mɛn *etc.)

Pigment ye looi, hydrogen peroxide

8, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic.