Shenzhen ShangYutai Technology Co., Ltd.
Kuæa>Proizvodi>EST701G PH elektrod
EST701G PH elektrod
The electrode is made of ultra low resistance** sensing glass film, in low electrical conductivity, high purity water conditions, also has a quick res
Detalji proizvoda

The electrode is made of ultra low resistance** glass film, in low electrical conductivity, high purity water conditions, also has a quick response, measuring accuracy, good stability, not easy hydrolysis characteristics, in 2 ~ 12PH range. The electrode is made of ultra low resistance** glass film, in low electrical conductivity, high purity water conditions, also has a quick response, measuring accuracy, good stability, not easy hydrolysis characteristics, in 2 ~ 12PH range. The electrode is made of ultra

Kuɛl: 2~12PH tɛ̈n yenë kek them: ≤0.02PH
Temperature ye luɔɔi: 0 ~ 90 ℃ Wakat jaabi: ≤5sec
Dɛɛr: ≤0.03PH/24hours Sensitive film impedance: ≤20×106Ω
Fittings: Standard 3/4 inch thread, 3 ~ 5 m cable (can be extended), Y terminal or BNC connection, various optional structures
Ye luɔɔi: Power plants, pure water plants, tap water plants, etc. Kuen ye kɔnɔ, koom ye kɔnɔ, koom ye kɔnɔ, koom ye kɔnɔ, koom ye kɔnɔ, koom ye kɔnɔ.

Luɔi kɛnɛ tɛmɛ

1, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ

2, electrode front end ye bɛ̈ɛ̈r ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble ye cɔl glass bubble.

3, pole socket adhil tɔ̈ɔ̈u ka cɛ̈ɛ̈r ku ka cɛ̈ɛ̈r, ni ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka cɛ̈ɛ̈r ka

4, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ

5, ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ

6, electrode after long use will produce passivation, its phenomenon is sensitive gradient reduced, response slow, reading incorrect, at this time you can immerse the electrode bottom ball with 0.1M * 24 hours, (0.1M * formulation: 9ml hydrochloric acid with distilled water diluted to 1000ml), then immerse with 3Mkcl solution for hours, or immerse the electrode bottom end in 4% HF (hydrofluoric acid) for 3~5 seconds, wash with distilled water, then immerse in 3Mkcl solution for hours to restore its performance.

7, glass bubble pollution or liquid interface blockage, will also cause the electrode to be passive, at this time, should be cleaned according to the nature of the polluting substance, with a suitable solution, see the detailed table below. (Kɛ kui raan)

Kɔɔr: Kɔɔr:

Oxide metal inorganic ka tɔ̈u 1M *

Organic oils detergents (low alkaline) ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

Polymer resin ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye

Protein blood cell sediment Acidase solution (cït mɛn *etc.)

Pigment ye looi, hydrogen peroxide

8, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic, a ye luui në run tök yic.

Онлайн разпит
  • Kontakti
  • Kompanija
  • Telefon
  • E-mail
  • WeChat
  • Kod provjere
  • Сједност поруки

Uspješna operacija!

Uspješna operacija!

Uspješna operacija!