Član VIP
Elektronik Single Seat Electric Regulator Valve
Product Name: Electronic Single Seat Electric Regulator Valve
Detalji proizvoda
| HBZDL(P)Serial Elektronik Single Seat Electric Regulator Valve |
|
| Karakteristika Produk | Parameter valve | |
|
Structure Superior: Equal section low flow resistance channel, rated flow coefficient large |
Pressure nominal PN10、PN16、PN40、PN64 | |
| Adjustability: Adjustable range large, flow characteristics optional etc. percentage or linear | Kɔmpiye Flanged, (special made: welded) | |
| Sealing Good: Can choose soft sealing, corrugated tube sealing, improve sealing performance. Sealing Good: Can choose soft sealing, corrugated tube sealing, improve sealing performance. Sealing Good: Can choose soft sealing, corrugated tube sealing, improve sealing performance. | Valve Body Material WCB、SS304、SS316、SS316L | |
| Application Wide: Various valve seat structure, heat sink, adapt to different pressure differential temperatures. Application Wide: Various valve seat structure, heat sink, adapt to different pressure differential temperatures. | Valve Core Material SS、SS304、SS316、SS316L、 Steele Stack Welding | |
| Parameters teknis | Material sealing PTFE、 Hard sealing, special high temperature materials | |
| Wɛɛr dɔ Electric open, electric shutdown | Ribbon Tube SS、SS304、SS316 | |
| Struktur Valve Seat P Single Seat | Fill Material Tetrafluoroethylene, Flexible Graphite | |
| Karakteristika Traffic Percentage, linear | Push Bar Kɔmpi 2Cr13 | |
| Range adjustable 50：1 | Pad Film Rubber Asbestos Plate, 1Cr18Ni9Ti Asbestos Wrapped Gasket | |
| Level of sealing (Level of sealing)III, IV, | Flange Standart GB9113-88、JB/T79-94、GB2555-81 | |
| Kɛlɛ fundamental±2.5% | Flanges khususANSI、JIS、DIN | |
| Temperature ɣän-30 ℃ ~ + 70 ℃ (-20 ℃ ~ + 60 ℃) | Temperature ye kɔnɔ | C3 grup-20 ℃ ~ 200 ℃ |
| Lɔ signal 4~20mA DC、0~10V DC | C4 grup-40 ℃ ~ 250 ℃ | |
| Signal output 4~20mA DC、0~10V DC | C5 grup-40 ℃ ~ 450 ℃ | |
| Voltage Power AC220V50HZ； 380V.AC 50Hz 24AC/DC | C7 grup-60 ℃ ~ 450 ℃ | |
| Kä ye kek looi në teknoloji ku kä ye kek looi | |||||||||||||||
| Dɛmɛt ye cɔl DN ((mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | ||||
| 10 | 12 | 15 | 20 | ||||||||||||
| Fɛɛr de flow Kv | Lineer | 1.8 | 2.8 | 4.4 | 6.9 | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 |
| Pɛrsɛnt | 1.6 | 2.5 | 4.0 | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | |
| Lɔ̈ɔ̈i ye cɔl L ((mm) | 16 | 25 | 40 | 60 | |||||||||||
| Allow leakage amount | Single Seat | Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl | |||||||||||||
| Sleeve | Kɔɔr: Level II Kɔɔr: Level VI | ||||||||||||||
| Tɛmpɛr ambient | Elektrik regulation valve: ≤95% | ||||||||||||||
| Kä ye kek looi në kë de kä ye kek looi në kë de kä ye kek looi në kë de kä ye kek looi në kë de kä ye kek looi në kë de GB/T4213-92. Parameters Technical ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye |
| Parameters Technical ye kɛ̈ɛ̈l ye kɛ̈ɛ̈l ye kɛ̈ɛ̈l ye kɛ̈ɛ̈l ye kɛ̈ɛ̈l | ||||||||||||
| Dɛmɛt ye cɔl DN ((mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| Motor model | Normal | ZAZ-60 DKZ-310 | ZAZ-60 DKZ-310 | DKZ-410 | DKZ-410 DKZ-510 | |||||||
| Elektronik | JHZAZ1 | JHZAZ2 | JHZAZ3 | JHZAZ3 | ||||||||
| Motor push (N) | Normal | 400 4000 | 400 4000 | 6400 | 6400 16000 | |||||||
| Elektronik | 2000 | 4000 | 6000 | 8000 | ||||||||
| Wakt kɛ̈ɛ̈l (S) | Normal | 12.5 | 20 | 32 | 48 | |||||||
| Elektronik | 30 | 30 | 48 | 60 | ||||||||
| Puɔ̈ɔ̈l ye kɔɔr (W) | Normal | 28 | 35 | |||||||||
| Elektronik | 6 | 15 | 25 | 40 | ||||||||
| Allow Pressure Difference (Lɔ̈ɔ̈i dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r)Electric Single Seat Adjustment Valve Allows Pressure Difference Meter | ||||||||||||||
| Nominal diameter/push ((N)) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |||
| 10 | 12 | 15 | 20 | |||||||||||
| 400 | 3.90 | 2.71 | 1.71 | 0.95 | 0.62 | 0.37 | 0.24 | 0.15 | ||||||
| 2000 | 6.40 | 6.40 | 6.40 | 4.87 | 3.11 | |||||||||
| 4000 | 6.40 | 6.40 | 6.40 | 6.40 | 6.11 | 3.73 | 2.39 | 1.53 | ||||||
| 6000 | 1.38 | 0.91 | 0.54 | |||||||||||
| 6400 | 1.45 | 0.95 | 0.61 | 0.40 | 0.28 | 0.15 | ||||||||
| 8000 | 0.50 | 0.34 | 0.19 | |||||||||||
| 16000 | 0.98 | 0.68 | 0.38 | |||||||||||
| Dimensions and Weight (Normal type) (Dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r)Unit: mm | ||||||||||||
| Dɛmɛt ye cɔl DN ((mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| A | 460 | 530 | 630 | |||||||||
| B | 230 | 230 | 260 | |||||||||
| H1 | 490 | 540 | 625 | |||||||||
| L | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |
| H2 | 175 | 180 | 215 | 218 | 230 | 280 | 285 | 315 | 400 | 460 | 540 | |
| H3 | 53 | 57.5 | 70 | 75 | 82.5 | 92.5 | 100 | 110 | 125 | 142.5 | 170 | |
| Kɔɔr kg | PN16/40 | 50 | 52 | 54 | 56 | 58 | 75 | 87 | 95 | 132 | 135 | 155 |
| PN64 | 53 | 56 | 58 | 65 | 68 | 84 | 110 | 129 | 177 | 180 | 210 | |
| Dimensions and Weight (Electronic)Unit: mm | ||||||||||||
| Dɛmɛt ye cɔl DN ((mm) | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
| d | Φ155 | Φ162 | Φ170 | |||||||||
| H4 | 290 | 325 | 380 | |||||||||
| L | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |
| H5 | 175 | 180 | 215 | 218 | 230 | 280 | 285 | 315 | 400 | 460 | 540 | |
| H6 | 53 | 58 | 70 | 75 | 82 | 92 | 100 | 110 | 125 | 142 | 170 | |
| Kɔɔr kg | PN16/40 | 10 | 12 | 15 | 17 | 18 | 34 | 87 | 54 | 76 | 79 | 100 |
| PN64 | 13 | 16 | 19 | 26 | 27 | 43 | 100 | 85 | 12 | 125 | 150 | |
| Lëk: |
| * Flange sealing type: PN10, PN16 for convex face, PN40, PN64 for concave convex face, valve body for concave face. |
| * Tɛ̈n yenë yen looi: GB12221-89 |
| * Jacket insulation type jacket bearing hot body interface: ye weldedΦ18*4 |
| * Valve body flange and flange end face distance can be manufactured according to the standard specified by the user. Valve body flange and flange end face distance can be manufactured according to the standard specified by the user. Valve body flange and flange end face distance can be manufactured according to the standard specified by the user. Cït mɛn: ANSI, JIS, JPI. |
Онлайн разпит
-
Kontakti
-
Kompanija
-
Telefon
-
E-mail
-
WeChat
-
Kod provjere
-
Сједност поруки
-