 
|
Ajuiɛɛr/working principle----------------------------------------------------------- ◆◆
|
| Process pressure through pressure sensor converts pressure signal to electric signal, after differential amplifier, output amplifier amplified, then through V/A converter conversion, converts to a 4 ~ 20mA standard current output signal with the input liquid level into a linear correspondence, converts to the pressure size. Process pressure through pressure sensor converts pressure signal to electric signal, after differential amplifier, output amplifier amplified, then through V/A converter conversion, converts to a 4 ~ 20mA standard current output signal with the input liquid level into a linear correspondence, converts to the pressure size. |
Struktura/Komponɛn strukturel-----------------------------------------------------◆◆
|
|
|
| 1 |
Front Cover |
5 |
Shell |
9 |
Silikon Sensor |
| 2 |
Header |
6 |
Terminal dɔ |
10 |
Cap |
| 3 |
Metal suffocation |
7 |
Back Cover |
11 |
Lock Screw |
| 4 |
Label |
8 |
Sensor overshoot |
12 |
Kuen anti-explosion |
|
Karakteristik produk/Karakteristika produk------------------------------------------------------------◆◆
|
| 1, a tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n Ka fara sensor original import ye laser ye lajɛ, a ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ |
| 2, gël ye IP65 ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël |
| 3, a lëu bï ya tɔ̈ɔ̈u ka kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r |
| 4, 4 ~ 20mA DC standard current signal output, 2nd wire work, with load anti-interference capability strong. |
| 5, size gana, kɛnɛya, install, debugging, maintenance, luɔɔi nɔgɔ. |
| 6, sensor de kalite ye kɔrɔ ku V / I integrated circuit ye kɔrɔ, peripheral devices ye tɔ̈u, reliability ye kɔrɔ, maintenance ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye. |
| 7, HART ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n |
| 8, online key configuration function. |
|
Parameters teknis/Parameters teknis-------------------------------------------------------◆◆
|
| Precision |
0.1%F·S 0.25% F·S 0.5% F·S |
| Range de mesure |
-95KPa-60MPa |
| Medium de mesure |
Liquid, gas, steam |
| Temperature ye tɔ̈ɔ̈u |
-40～125℃ |
| Voltage Power |
12~24V DC |
| Temperature ye luɔɔi |
-10～80℃ |
| Material ye kɔrɔ |
316L stainless steel |
| Temperature impact |
＜0.02%/℃ |
| Load Resistance (Load Resistance) |
≤750Ω |
| Kapasitet overload |
1-2 ye kaam |
| Mechanical gël |
IP65 |
| Humidity |
<unk>95%RH |
| output |
Dual Wire 4~20mA DC |
| Ajuiɛɛr |
EXZ231B type security gate |
| Weight ye |
<1Kg |
| Zero point temperature coefficient |
A ka tɔ̈u 0.02%/℃ |
| Temperature coefficient |
A ka tɔ̈u 0.02%/℃ |
| Voltage Power |
24V DC |
| Level of explosion |
iaIICT5 |
|
Dimensions/Dimensions (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions) (Dimensions)----------------------------------------------------------◆◆
|
 |
Pilihan Produk/sugandin karen------------------------------------------------------------◆◆
|
| 1. Karta sugal |
| Wala |
S |
Kode |
Nyuɔ |
| Analog |
Smart |
HH308 |
Silikon Pressure Transmitter |
| |
Kode |
Dizayn Serial Number |
| |
A1 |
Silikon Sensor |
| |
B1 |
Sensor keramik |
| |
C1 |
Sensor Chiping Film |
| |
D1 |
Sensor sanitasyon |
| |
Kode |
Pressure suguya |
| |
A |
Pressure absolu |
| |
G |
Pressure |
| |
S |
Pressure of sealing |
| |
Kode |
Nyuɔ̈th |
| |
1 |
Wala |
| |
2 |
3 1/2 bit LCD |
| |
3 |
3 1/2 bit LED |
| |
Kode |
Range de mesure |
| |
1 |
0~35KPa |
| |
2 |
0~100KPa |
| |
3 |
0~200KPa |
| |
4 |
0~350KPa |
| |
5 |
0~700KPa |
| |
6 |
0～2.0Ma |
| |
7 |
0～3.5Ma |
| |
8 |
0~7Ma |
| |
9 |
0~20Ma |
| |
0 |
0~60Ma |
| |
Kode |
Precision |
| |
A |
0.1%F·S |
| |
B |
0.25%F·S |
| |
C |
0.5%F·S |
| |
Kode |
Ye install |
| |
1 |
M20x1.5 |
| |
2 |
1/2NPT |
| |
3 |
Flange (Flange, film optional) |
| |
Kode |
Method anti-explosion |
| |
N |
No explosion normal |
| |
I |
Benan explosion gël |
| |
E |
Isolation anti-explosion |
|
| |
| 2. Pilih |
| 1, ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ |
2, probe model; |
| 3, pressure type: (pressure, absolute pressure) |
4, tɛmɛ tɛmɛ: (0.5, 0.25, 0.1); |
| 5. Meson tɛmɛ: 0-10 ~ 80°C; |
6, tɛ̈n ye nyuɔɔth: wala tɛ̈n ye nyuɔɔth, tɛ̈n ye nyuɔɔth; |
| 7, Installation method: M20x1.5 (threaded), flange (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) (flange) |
8、Power supply: 24V DC； |
| 9, output signal: 4-20mA; |
10, gël: |
| 11, gël anti-explosion: |
12. Kuen kɔ̈k |
|
Installation Requirements/Wɛ̈t ye looi--------------------------------------------------◆◆
|
| 1. Kuen Installation |
| 1, ka tɔ̈ɔ̈u në 0.03MPa, ka tɔ̈ɔ̈u në 0.03MPa, ka tɔ̈ɔ̈u në 0.03MPa, ka tɔ̈ɔ̈u në 0.03MPa |
| 2, during installation, you should use the wrench to tighten the transmitter from the bottom of the transmitter's hexagonal screw, so as not to directly rotate the transmitter's top so as to cause the connection to disconnect. |
| |
| 2. Luɔi |
| 1.When you receive products, please check whether the packaging is intact, and check whether the transmitter model and specifications correspond to the products you purchased. 1.When you receive products, please check whether the packaging is intact, and check whether the transmitter model and specifications correspond to the products you purchased. |
| 2. ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈ |
| 3.Ensure that the power supply voltage meets the probe power supply requirements, the positive, negative power supply corresponds to the product's positive, negative wiring, ensuring that the pressure source's highest pressure is within the range of the product; |
| 4.During the pressure measurement process, you should slowly press and remove the pressure, avoiding instantaneously adding to the highest pressure or lowering to the low pressure. 4.During the pressure measurement process, you should slowly press and remove the pressure, avoiding instantaneously adding to the highest pressure or lowering to the low pressure. |
| 5.When you remove the probe, check that the equipment has disconnected the pressure source, so that the media spray does not occur accidentally. 5.When you remove the probe, check that the equipment has disconnected the pressure source, so that the media spray does not occur accidentally. |
| 6.This product is not explosion-proof, use in the explosion-proof zone will cause serious bodily injury and serious material loss. 6.This product is not explosion-proof, use in the explosion-proof zone will cause serious bodily injury and serious material loss. 6. |
| 7.Sensor belongs to precision devices, users when using please don't disassemble their own, and don't touch the film film, so as not to cause product damage. Sensor belongs to precision devices, users when using please don't disassemble their own, and don't touch the film film, so as not to cause product damage. |
|
Kabel Guide/Wiring guide-----------------------------------------------------------------◆◆
|
 |
Common Faults and Solutions (Kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl-kɛl)------------------------------------◆◆
|
| Failure phenomena |
Analiz dalil |
Metode de exclusion |
| Transmitter wala output signal |
Transmitter wala power |
Lɔ̈k kɛ̈ɛ̈l kɛ̈ɛ̈l kɛ̈ɛ̈l kɛ̈ɛ̈l kɛ̈ɛ̈l |
| Kawɛl |
| Lɔ̈ɔ̈m ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k ye kɛ̈ɛ̈k |
Transmitter case wala piny |
Luɔ̈ɔ̈i kabel ye gël ku gël piny
Transmitter housing ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r
|
| Radio frequency interference ye duno |
| Kabel ye gël ka tɔ̈u |
| Ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ |
Transmitter acie luui në kë wïc |
Lɔ̈k transmitter tɔ̈u në ɣän ke kɔc cï gam ka tɔ̈u në ɣän ke kɔc cï gam ka tɔ̈u në ɣän ke kɔc cï gam |
| Transmitter output tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n |
Power supply dɔ̈ŋ |
Lɔ̈k bɛ̈ɛ̈i 9-36VDC |
| Load dɔ̈ŋ |
Ajuiɛɛr load |
|
Aksesɛr size-------------------------------------------------------------◆◆
|
 |
| Welded Pipe Connector |
Base |
| Note: Threaded part is usually M20x1.5, can be customized according to customer requirements |
|
Paket Produk/Paket kä ye looi---------------------------------------------------------◆◆
|
 |
|
| |
 |
 |
 |
 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
