IPX1/IPX2 Vertical Drop Water Test Box DeviceWël:
Drop water device is mainly used to test the performance of products in a rainy climate environment when storing, transporting and using, mainly used for electrical and electronic products, lamps, electrical cabinets, electrical components, cars, motorcycles and their parts etc. products in a simulation of rainy climate conditions, the physical and other related performance of products to be tested, after testing, by checking to judge whether the performance of products can meet the requirements, so as to be used for product design, improvement, inspection and factory inspection.
Kä ye kek looi ye kek looi ye kek looi:
IEC60529; 1989+A1, GB4208, GB7000.1 wɛ̈t ye kɔɔr në IPX1/2 test
IPX1/IPX2 Vertical Drop Water Test Box DeviceTeknoloji:
IPx1
Method name: Vertical drip water test (Tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye tɛɛr ye)
Test equipment: drop water test equipment; test equipment: drop water test equipment; test equipment: drop water test equipment; test equipment: drop water test equipment;
Sample placing: tɛ̈n yenë yen tɔ̈u thïn në tɛ̈n yenë yen tɔ̈u thïn në tɛ̈n yenë yen tɔ̈u thïn në tɛ̈n yenë yen tɔ̈u thïn në tɛ̈n yenë yen tɔ̈u thïn në tɛ̈n yen
Dɛ̈ɛ̈r ye 20X20mm
Kä ye looi: Pii ye looi 1 ± 0.5mm/min;
Wakat: 10 min;
IPx2
Method name: Tilt 15° drop water test; ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n
Test Equipment: Drop Water Test Equipment (Tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr-tɛɛr)
Sample placement: make a face of the sample and the vertical line into a 15° angle, the distance from the top of the sample to the drop hole is not greater than 200mm. Sample placement: make a face of the sample and the vertical line into a 15° angle, the distance from the top of the sample to the drop hole is not greater than 200mm. Ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ
Kä ye looi: Pii ye tɔ̈ɔ̈u 3 ± 0.5mm/min;
Wakat: 4×2.5 min )
IPX1/IPX2 Vertical Drop Water Test Box DeviceParameters teknis:
|
Model |
SE-DY-800 |
|
D×W×H |
1000× 800 × 1000mm (lëu bï ya looi në kë wɛ̈t ye raan ɣaac) |
|
D×W×H |
1300× 1100 × 1750mm |
|
Total Power |
1.3KW |
|
Net Weight |
200kg |
|
Drop tank height |
200~ 2000m (lëu bï ya waar) |
|
Distance of drop hole |
20*20mm |
|
Rain |
1~ 5mm/min |
|
Drip Water Hole |
Φ0.4mm |
|
Rain water pressure |
80~ 100kpa |
|
Diameter test bench |
Φ500mm |
|
Test bench angle |
30°~ 90° |
|
Lifting Method |
Orbit Vertical Up and Down |
|
Kontrol nji |
Flow Meter |
|
Sistɛm pi |
Tank, pomp ye dɔ̈ɔ̈r |
|
Ajuiɛɛr gël |
Kuen, koom, koom koom |
