
Product description:
SP-LDE tɛ̈n yenë tɛ̈n yenë tɛ̈n yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yenA tɔŋ Faraday electromagnetic induction law. Flow meter's measurement tube ye short tube ye cïn magnetic alloy ye cɔl non-conductive alloy ye cɔl insulation material. Electrodes fila ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ. A electrode head and the lining inside surface are essentially the same. A electrode head and the lining inside surface are essentially the same. A electrode head and the lining inside surface are essentially the same. Na cï magnetic coil ye magnetic pulse ye looi, a bï magnetic field ye looi ke ye magnetic flux density B ye looi në direction vertical to the measuring tube axis. Në ye thaa kënë, na cï lëu ye tɔ̈u në tubu de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ A ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈ E (signal de flux) ye tɔ̈u në electrode yic ku ye tɔ̈u në cable yic.
Description:
SP-LDE series farmland irrigation water flow meter, pump output water meterA ye electromagnetic converter kernel ye tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n Converter circuit design uses international advanced technology, input impedance up to 1015 ohms, total mode suppression ratio is better than 100db, for external interference and 60Hz/50Hz interference suppression capacity is better than 90db, can measure the low conductivity fluid medium flow. Converter circuit design uses international advanced technology, input impedance up to 1015 ohms, total mode suppression ratio is better than 100db, for external interference and 60Hz/50Hz interference suppression capacity is better than 90db, can measure the low conductivity fluid medium Sensor de yen ye luɔɔi de magnetic field technology ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈
Pii ye tɔ̈ɔ̈u në ɣän ke puɔ̈ɔ̈c yiic, pii ye tɔ̈ɔ̈u në puɔ̈ɔ̈c yiicLɔ̈ɔ̈i de kä ye kek tääu thïn:
|
Material ye kɔnɔ |
Nyuɔ |
Symbol |
Kuen |
Temperature de luɔi |
Luɔi Liquid |
|
Rubber |
Neoprene |
CR |
A ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n |
<60℃ |
Pii kɔl, pi kɔl, pi kɔl |
|
Rubber polyurethane |
PU |
Kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ |
<60℃ |
Pulp, mineral pulp, etc. |
|
|
Plastik Fluor |
Polytetrafluoroethylene |
F4 wala PTFE |
Chemical properties are stable, resistant to boiling hydrochloric acid, sulfuric acid, royal water, concentrated alkali corrosion. Chemical properties are stable, resistant to boiling hydrochloric acid, sulfuric acid, royal water, concentrated alkali corrosion. |
<160℃ |
Acid alkaline salt liquid ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye |
|
Polyfluoroethylene tɔŋ: |
F46 wala FEP |
Kemikal ye F4 ye |
<120℃ |
Acid alkaline salt liquid ye kɛ̈ɛ̈r |
|
|
Tetrafluoroethylene ku ethylene copolymers |
F40 wala ETFE |
Kemikal ye F4 ye |
<120℃ |
Acid alkaline salt liquid ye kɛ̈ɛ̈r |
|
|
Plastik |
Polyethylene |
PO |
Acid, alkali, salt ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye |
<60℃ |
Pii ye cɔl acid alkali salt liquid |
|
Polybenzene sulfur |
PPS |
Acid, alkali, salt ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye |
<100℃ |
Pii ye cɔl acid alkali salt liquid |
Lappol Application
Ku sababu de kä ye kek looi, ka kɔc ye kek luui në käke kemikal, mïïth, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi, kɔc ye kek looi
Pii ye tɔ̈ɔ̈u në ɣän ke puɔ̈ɔ̈c yiic, pii ye tɔ̈ɔ̈u në puɔ̈ɔ̈c yiicParameters baara:
|
DN ye cɔl |
10,15,20.25,32,40,50,65,80,100,125,150,200,250,300,350,400,500,600……. .1800 |
|
Nominal pressure Mpa |
0.6,1.0,1.6,2.5,4.0MPa |
|
Kɔmpiye Process |
Flange Connection, Flange Standard: GB/T9119-2000 |
|
Struktur form |
A yeke (IP65), a yeke (IP65) la a yeke (IP68) |
|
Lining Material |
PTFE (≥DN25), neoprene (≥DN65), F46, Polyurethane, |
|
Elektrod Material |
Platinum, tungsten, titanium, 316L, tungsten carbide |
|
Material de tube de mesure |
304 Stainless Steel |
|
Kä ye kek looi ku kä ye kek looi |
Carbon steel (standard), stainless steel (non-standard) |
|
Temperature ye kɔnɔ |
≤180℃ |
|
Alam anti-explosion |
No explosion |
|
Level of accuracy |
0.5 (0.3m/s ~ 10m/s) |
|
Repetibility |
0.15% |
|
A lëu bï ya tɛmɛ |
0.05m/s~12m/s |
|
Kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl |
0.3m/s ~ 10m/s (0.5 ye yic) |
|
Power |
18 ~ 36VDC wala 85 ~ 265VAC, Power: ka tɔ̈u 8W |
|
output |
4-20mA, Frequency output (0 ~ 10KHZ), pulse equivalent |
|
Magnetic Method |
Three values low frequency rectangular wave exciter and high frequency exciter |
|
Magnetic Current ye |
160mA |
|
Minimum conductivity ye wïc |
≥0.5μs/cm2 |
|
Elektrik Interface |
M18×1.5 |
|
Ngam gël |
IP65 (ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan |
|
Lokal |
Grounding ring (user specified) wala ground electrode, pipe grounding |
|
Nyuɔ̈th |
Resolution ye nyuɔɔth FSTN mode 128×64 |
|
Waktu data tɔ̈ɔ̈u |
EEPROM ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n |
|
Average Time Without Failure |
MTBF=30000h |

Lɔ̈k kalibre de instrument:
|
Dɛmɛtɛr (mm) |
10 |
15 |
20 |
25 |
32 |
40 |
50 |
65 |
|
Qmin(m3/h) |
0.05 |
0.1 |
0.3 |
0.4 |
0.8 |
1.2 |
2 |
3 |
|
Qmax(m3/h) |
3.5 |
8 |
15 |
22 |
35 |
55 |
95 |
150 |
|
Dɛmɛtɛr (mm) |
80 |
100 |
125 |
150 |
200 |
250 |
300 |
350 |
|
Qmin(m3/h) |
5 |
8 |
12 |
18 |
25 |
35 |
50 |
60 |
|
Qmax(m3/h) |
220 |
350 |
550 |
800 |
1400 |
2200 |
3200 |
4500 |
|
Dɛmɛtɛr (mm) |
400 |
450 |
500 |
550 |
600 |
700 |
800 |
900 |
|
Qmin(m3/h) |
80 |
120 |
180 |
230 |
300 |
400 |
500 |
600 |
|
Qmax(m3/h) |
5500 |
7500 |
9000 |
11000 |
13000 |
16600 |
21700 |
27468 |
|
Dɛmɛtɛr (mm) |
1000 |
1100 |
1200 |
1400 |
1600 |
1800 |
2000 |
2200 |
|
Qmin(m3/h) |
800 |
1000 |
1200 |
1600 |
2100 |
2700 |
3300 |
4000 |
|
Qmax(m3/h) |
33900 |
41000 |
48800 |
66400 |
86800 |
109000 |
135000 |
164000 |
| Model | Kalibre | |||||
| SP-LDE | 15~2600 | |||||
| Kode | Elektrod Material | |||||
| K1 | 316L | |||||
| K2 | HB | |||||
| K3 | HC | |||||
| K4 | Titanium | |||||
| K5 | Tantal | |||||
| K6 | Platinum alloy | |||||
| K7 | Stainless steel coated tungsten carbide | |||||
| Kode | Material ye kɔnɔ | |||||
| C1 | Tetrafluoroethylene (F4) | |||||
| C2 | Polyfluoroetylene (F46) | |||||
| C3 | Polyfluoroethylene (FS) | |||||
| C4 | Polyvinyl rubber | |||||
| C5 | Rubber polyammonium | |||||
| Kode | Funksiɔn | |||||
| E1 | 0.3 ye | |||||
| E2 | 0.5 ye | |||||
| E3 | Level 1 | |||||
| F1 | 4-20Madc, Load ≤750Ω | |||||
| F2 | 0-3khz, 5v active, variable pulse width, output high-end effective frequency | |||||
| F3 | RS485 Interface | |||||
| T1 | Normal Temperature | |||||
| T2 | High Temperature | |||||
| T3 | Super High Temperature | |||||
| P1 | 1.0MPa | |||||
| P2 | 1.6MPa | |||||
| P3 | 4.0MPa | |||||
| P4 | 16MPa | |||||
| D1 | 220VAC±10% | |||||
| D2 | 24VDC±10% | |||||
| J1 | Struktur tök | |||||
| J2 | Struktur split-type | |||||
| J3 | Struktur ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l | |||||
