Član VIP
Powder Metallurgy Structure Parts Volume, Density Tester
Product Name: Powder Metallurgical Structure Volume, Density Tester Product Model: JT-120P, JT-1200PN Product Brand: Taiwan MatsuHaku Product Origin:
Detalji proizvoda
Name: Powder Metallurgy Structure Parts Volume, Density Tester
Model:JT-120P JT-1200PN
Luɔi tënë:Powder metallurgy upstream industry, new materials research laboratory (Laboratory de puɔ̈ɔ̈r metallurgy, laboratory de puɔ̈ɔ̈r metallurgy, laboratory de puɔ̈ɔ̈r metallurgy)
Prinsip:
cïmën de ASTM B311, B328; MPIF 42、57; JIS Z2505、Z2506、GB/T5163。 Can be used for boiling method, vacuum saturation method measurement, using the Archimedean principle float method, accurate direct reading measurement values. Can be used for boiling method, vacuum saturation method measurement, using the Archimedean principle float method, accurate direct reading measurement values.
Funksiɔn:
●Mode 1: direct read the body density of structural parts, ye kë ye cɔl "density" ye cɔl "density" ye cɔl "density" ye cɔl "density" ye cɔl "density" ye cɔl "density". Porosity, humidity density, volume.
●Mode 2: direct read the sintered oil bearing content of oil,. Porosity.
●Mode 3: A lëu bï kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈
● Luɔɔi de tank dɔ̈ɔ̈r ye looi, ka bɛ̈ɛ̈i dɔ̈ɔ̈r bɛ̈ɛ̈i dɔ̈ɔ̈r bɛ̈ɛ̈i dɔ̈ɔ̈r. Tank size 50X100X90 JJT-1200PN alëu bï tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈
Powder Metallurgy Structure Parts Volume, Density Tester Specifications:
Model
|
JT-120P
|
JT-1200PN
|
Scale Weight Range
|
0.001g-120g
|
0.01g-1200g
|
Kɛnɛya kalkallo
|
0.0001 g/cm3
|
0.001 g/cm3
|
Setup
|
Temperature compensation setting, solution compensation setting, water-resistant treatment oil density setting
|
Онлайн разпит