Član VIP
Detalji proizvoda
Tianjin Tian Drag TNJ500 Tractor Technical Parameters
| Proyek | Unit | Dizayn Value |
| A ye cɔl a minimum power code (horsepower) ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r | / | 50 |
| Model, nyin | / | TNJ500、 Traktor rot |
| Masin Type | / | Wheel |
| Type rack ye | / | Wala ram |
| Type drive ye | / | Drive duu |
| Luɔi Machine | / | General Use |
| Dimension of the whole machine outline (length × width × height and parts) (Dimension of the whole machine outline) (length × width × height and parts) (Dimension of the whole machine outline) (length × width × height and parts) | mm | 3470×1300×2265 |
| Axle distance | mm | 1830 |
| Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl | mm | 960/1150 |
| Wheel distance (front wheel/rear wheel) | mm | 960, 1100, 1200/940-1150 |
| Minimum floor gap and parts (Dɛɛr ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r) | mm | 325 (tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n |
| Distance horizontal from the front end of the clutch housing to the rear drive axis line (Dɛ̈ɛ̈r ye cɔl 'front end' ye cɔl 'front end' ye cɔl 'front end' ye cɔl 'front end' ye cɔl 'front end' ye cɔl 'front end' | mm | 1070 |
| Gearbox gear sub-shaft hole centre distance | mm | 80.5 |
| Total Track Tractor Drive Wheel Axis Line to Guiding Wheel Axis Horizontal Distance | mm | / |
| Minimal luɔɔi kalite | kg | 1450 |
| Standard weighting (front/rear) | kg | 72/60 |
| Track Grounding Pressure | kPa | / |
| Minimum use ratio | kg/kW | 39.4 |
| Sɛnɛ (fɛɛrɛ/kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ-kɛ) | / | 8/2 |
| Number of main variable speed | / | 4+1 |
| Adɛɛr Speed Variable | / | 2 |
| Top Design Theory Speed | km/h | 31.31 |
| Motɛr ku Clutch | / | Direct Link |
| Modèle de dispositif de protection contre la chute (cabin ou cadre de sécurité) Modèle de dispositif de protection contre la chute (cabin ou cadre de sécurité) Modèle de dispositif de protection contre la chute (cabin ou cadre de sécurité) | / | TE804.46.01 |
| Type of tilt protection device (cab or safety frame) (ye cɔl "cabin" wala "safety frame") | / | Framework of security |
| Kuen ye kɔc gël (cabin wala safety frame) | / | Tianjin Tractor Manufacturing Co., Ltd. (Tianjin Tractor Manufacturing Co., Ltd.) |
| Motor model | / | YN4H055-30VE |
| Motor Structure | / | Linear, direct spray, water cooling, four stroke |
| Motor Factory | / | Shandong Yunyi Power Co., Ltd. |
| Motor ye dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a dɔ'a | / | Natural inhalation |
| Silinder engine | / | 4 |
| Motor Power | kW | 36.8 |
| Motor's rated net power | kW | 36.8 |
| Motɛr ye rot | r/min | 2400 |
| Motor cooling | / | Pii koor |
| Filter Air Model | / | K495 |
| Filter air ye | / | Humidity |
| Dimensions of the exhaust tube silencing chamber (length × width × thickness or diameter × length) (Dimensions of the exhaust tube silencing chamber) (length × width × thickness or diameter × length) (Dimensions of the exhaust tube silencing chamber) (length × width × thickness or diameter × length) | mm | Φ145×475 |
| Quality of exhaust tube noise cancellation | kg | 4.7 |
| Model Seat Driver | / | SMT-CS06-1 |
| Fabrik ye kɔrɔ driver | / | Weifang Shumei Machinery Co., Ltd. |
| Modɛl Belt | / | FS2001 |
| Fabrika dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r | / | Yangzhou Fusheng Automobile Parts Factory |
| Steering System | / | Hidrolik |
| Steering System Steering Manipulation Mechanism | / | Kɔl |
| Steering System Steering Mechanism Type | / | Gɛlɛ fɛɛr |
| Nombre de boîtes de transmission | a | 2 |
| Gearbox (gearbox) ye | / | Mechanical Plane Composition |
| Lokasi Speed | / | Kɔrɔ 2 |
| Main Speed Change Mode | / | Mechanical Graded Block (Mechanical Graded Block) |
| Sub-speed switching mode | / | Mechanical Graded Block (Mechanical Graded Block) |
| Tire model (front wheel/rear wheel) | / | 6.50-16/11.2-24 |
| Tɛɛr dɔ̈ɔ̈r (front wheel/rear wheel) | / | 2/2 |
| Track Material | / | / |
| Lɛ̈ɛ̈r Trackboard | mm | / |
| Sistɛm hydraulic suspension | / | Divided |
| Type of suspension device | / | 3 point hanging behind |
| Kategori awowa hangal | / | Kategori 2 |
| Pump hydraulic ye luui | / | CBN-F320 |
| Hydraulic output group | / | Grup 1 |
| Valve de sécurité de appareil de travail | MPa | 18±0.5 |
| Number of power output shaft flowers | / | 6 |
| Power output axis standard rotation speed | r/min | 540/720 |
| Optional configuration Tire model (front wheel/rear wheel) | / | 5.0-15/9.5-24 |
Онлайн разпит
-
Kontakti
-
Kompanija
-
Telefon
-
E-mail
-
WeChat
-
Kod provjere
-
Сједност поруки
-