1. Product name: Two box cold and hot impact testing machine

Model: RTE-Two Box-150A

2. Sample Limits:

Kä ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye:Testing and storage of flammable, explosive, volatile substances samples. Testing and storage of flammable, explosive, volatile substances samples. Testing and storage of flammable, explosive, volatile substances samples. Testing and storage of flammable, explosive, volatile substances samples.Testing and storing corrosive substances samples (Testing and storing corrosive substances samples) (Testing and storing corrosive substances samples) (Testing and storing corrosive substances samples) (Testing and storing corrosive substances samples) (Testing and storing corrosive substances samples)Testing wala storage of biological samples,Testing and Storage of Strong Electromagnetic Emission Sources Samples (Testing and Storage of Strong Electromagnetic Emission Sources)

3. Volume ku size:

3.1 Nominal volume (L): 150L

3.2 Dimension (mm): W 500 × H 500 × D600

4. Luɔi:

4.1 Kä ye kek tïŋ në ɣän kɔ̈k yiic:

Tɛmɛɛr: 5~35℃

Humidity ≤85%RH, circulating cooling water temperature ≤30℃

Pii ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

No sample in the test box (unless otherwise stated) (No sample in the test box) (No sample in the test box) (No sample in the test box) (No sample in the test box) (No sample in the test box) (No sample in the test box) (No sample in the test box) (No sample in the test box)

4.2 Wɛɛr tɛm:

4.2.1 Tɛmɛ: -55°C/+150°C

4.2.2 Temperature fluctuation: ± 0.5 ℃

4.2.3 Temperature deviation: ±2.0 ℃

4.2.4 Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

4.2.5 Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

4.2.6 Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

4.2.6.1 Temperature rate: +60 ~ +200 ℃ ≤30 min (High temperature slot)

4.2.6.2 cooling rate: -10 ~ -70 ℃ ≤90 min (low temperature slot)

4.2.6.3 Warm recovery time less than 5 minutes (Warm recovery time less than 5 minutes) (Warm recovery time less than 5 minutes) (Warm recovery time less than 5 minutes) (Warm recovery time less than 5 minutes) (Warm recovery time less than 5 minutes)

4.2.6.4 Wakat ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

4.2.6.5 Wakat ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n

4.2.6.6 Wakat ye kɔc cɔl: High temperature (150 ℃) 30min

4.2.6.7 Wakat ye kɔc cɔl: Low temperature (-55 ℃) 30min

4.2.7 Ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ:

GB/T 2423.1-2001 Test A: Low temperature test method

GB/T 2423.2-2001 Test B: High temperature test method

GB/T2423.22-2002 Test N: Method of Testing Temperature Change Test Na

GJB 150.3-1986 Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

GJB 150.4-1986 tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r

GJB 150.5-1986 Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

Na cïn kë wɛ̈t ye lueel, kä ye kek tɔ̈ɔ̈u në kë de luɔɔi ye kek tɔ̈ɔ̈u në kë de luɔɔi ye kek tɔ̈ɔ̈u.

II. Kuen de luɔɔi:

1. Struktura:

1.1 Ajuiɛɛr ye cɔl thermal insulation:

Wall: High-end steel plate painting

Wɛ̈ɛ̈r: SUS304 stainless steel plate

Thermal insulation material: PU foam + glass fiber (≥85 ℃ ye dɔɔr në tɛmɛ dït)

1.2 Air conditioning channel:

Fan, heater, dry burning prevention, convection exhaust fan, ventilation uniform

1.3 Tɛɛr ye looi në laboratory:

1.3.1 Kuen ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye

1.4 Dɔŋ:

1.4.1 Dɔɔr dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r

1.5 Control panel (në cabinet de contrôle de distribution de électricité):

Controller Display, Hypertherm Protection Setter, Total Power Switch, RS-485 Communication Interface

1.6 Mechanical Room:

Mechanical room includes: cooling unit, drainage water device, exhaust air machine

1.7 Kabinet de kontrol de distribution de électricité:

Total Power leakage circuit breaker, controller, distribution board, cooling fan, high and low temperature cycle fan motor

1.8 Warmer:

1.8.1 Kä ye kek looi: Nickel chromium alloy electric wire type

1.8.2 Heater control method: no contact etc. cycle pulse width adjustment, SSR (solid state relay)

2. Cooling System:

2.1 Kuen luɔɔi: Kuen ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom ye koom

2.2 Compressor de refroidissement: Compressor de piston

2.3 Evaporator: Warm exchanger ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ

2.4 Water cooling condenser: brazed plate type heat exchanger (water cooling type)

2.5 Ajuiɛɛr ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n

2.6 Condensator de vaporization: solder plate type heat exchanger

2.7 Fɛɛrɛ ye cooler looi:

2.8.1 PLC (Programmable Logic Controller) ye tɛ̈n yenë kɔc mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac mac

2.8.2 Condensation pressure regulating valve (cooling water flow regulating device) (Valve ye kɔc cɔl condensation pressure regulating valve)

2.8.3 Compressor cooling loop

2.8.4 Power regulation circuit

2.8 Refrigerant: R404A (environmental friendly) R23 (environmental friendly)

2.9 Kä wɛɛr:

2.9.1 Kä ye kek looi në ɣän kɔ̈k yiic aye kek looi në ɣän kɔ̈k yiic

2.9.2 Filtrɛr koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom koom

3. Elektrik Control System:

3.1 Controller (model): LCD Display Microcomputer Controller Japan Application Electronics OYO Controller U8226S

3.2 Wël ye looi: Wël ye looi

3.3 Wɛ̈t ye looi: Wɛ̈t ye looi në touchscreen

3.4 Kuen:

3.4.1 Temperature Resolution: 0.1 ℃

3.4.2 Tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n

3.4.3 Temperature measurement: DIN specifications ψ1.64 thermocouple 3 groups

3.4.4 PID ye kɔɔr

3.5 Kuen ye nyuɔɔth:

3.5.1 Luɔi de software de graphics, screen direct touch options, including boot settings, curve display, loop program, display screen, auxiliary settings

3.5.2 A bɛ se ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

3.5.3 Temperature program setup to graphic curve display, with real-time display program curve execution function

3.5.4 Wël ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n

3.6 Programming Capacity ku Control Functions

3.6.1 Ajuiɛɛr ye tɔ̈u thïn: zui 100

3.6.2 Lɛ̈k ye looi: Lɛ̈k ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi ye looi

3.6.3 Taim ye looi 0 ~ 99Hr59min

3.6.4 Tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n

3.7 Input: K-type thermocouple.

4. Gɛlɛ̈ɛ̈r Gɛlɛ̈ɛ̈r Gɛlɛ̈ɛ̈r Gɛlɛ̈ɛ̈r Gɛlɛ̈ɛ̈r

4.1 Cooling System:

4.1.1 Kompresor ye tɔ̈u

4.1.2 Kompresor motɛr cɛ̈ɛ̈r

4.1.3 Pii ye cɔl cooling water supply low pressure

4.2 Laboratory:

4.2.1 Laboratory room temperature too high, too low protection (controller built)

4.2.2 Tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

4.3 Kuen kɔ̈k:

4.3.1 Total power phase sequencing and missing phase protection

4.3.2 Gɛlɛ̈ɛ̈r

4.3.3 Cycle fan thermal relay, motor temperature switch

4.3.4 High/low greenhouse overheating protection switch, high/low greenhouse overheating protection (controller built)

4.3.5 Compressed air pressure switch, exhaust valve

5 Kuen wɛɛr:

5.1 Power cable: 5 core (4 core cable + protection grounding cable) 1 cable (2.5 m long)

5.2 Total power leakage circuit breaker

6. Add-ons (Functions): Add-ons (Functions) man dɔ̈ɔ̈r ye wɛ̈t ye wɛ̈t ye wɛ̈t ye wɛ̈t ye wɛ̈t ye wɛ̈t ye wɛ̈t ye wɛ̈t ye wɛ̈t

6.1 lead hole: lead hole has diameter φ50mm, φ100mm specifications, its location and number in the box structure allowed and not affecting the performance can be customized according to the user requirements. 6.1 lead hole: lead hole has diameter φ50mm, φ100mm specifications, its location and number in the box structure allowed and not affecting the performance can be customized according to the user requirements. 6.1 lead hole: lead hole has diameter φ50


7. Kä ye kɔc luɔ̈ɔ̈i thïn (kɔc ye kɔc luɔ̈ɔ̈i thïn aye kɔc ye kɔc luɔ̈ɔ̈i thïn gam):

7.1 Wɛɛr:

7.1.1 Dɛ̈ɛ̈r cɛ̈ɛ̈r, ka cɛ̈ɛ̈r cɛ̈ɛ̈r

7.1.2 No vibration strong around the device (No vibration strong around the device)

7.1.3 No strong electromagnetic field effect around the device (Ka tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye)

7.1.4 Tɛ̈n tɛ̈n tɛ̈n tɔ̈u, tɛ̈n tɔ̈u, tɛ̈n tɔ̈u, tɛ̈n tɔ̈u, tɛ̈n tɔ̈u

7.1.5 Lɔ̈ɔ̈m ye tɔ̈ɔ̈u në ɣän thiin koor yiic

7.1

7.1.7 Lɔ̈k tɛ̈n yenë kɛ̈ɛ̈r looi ku tɛ̈n yenë kɛ̈ɛ̈r looi

7.2 Kä ye kek looi:

7.2.1 Temperature: 5 ℃ ~ 35 ℃

7.2.2 Kɔɔr ye kɔɔr: ≤ 85%RH

7.2.3 Air pressure: 86~106kpa

7.3 Pii ye cɔl cooling cycle (15 ton water tower):

7.3.1 Pii tɛmɛ: Pii tɛmɛ: ≤ +30 ℃

7.3.2 Pii ye looi: Pii ye looi: 0.25 ~ 0.4MPa

Cooling water pipeline system design and construction should ensure that at rated flow the cooling machine entrance pressure is 0.25~0.4MPa, the cooling machine exit to cooling water tower the pressure does not drop more than 0.05 Mpa. Cooling water pipeline system design and construction should ensure that at rated flow the cooling machine entrance pressure is 0.25~0.4MPa, the cooling machine exit to cooling water tower the pressure does not drop more than 0.

7.3.3 Lɔ̈ɔ̈i: 15T/h

7.3.4 Pipe Connector: 1 pair of internal threaded connectors on refrigerator

7.3.5 Kä wɛɛr:

7.3.5.1 Pii ye cɔl cycle cooling ye cɔl GB 50050-1995 Industrial cycle cooling water treatment design specifications

7.3.5

7.3.5

7.4 Power: AC380V 3-phase 4-wire + protection ground wire

7.4.1 Voltage ye gam: AC (380 ± 38) V

7.4.2 Kuɛl ye looi: (50±0.5) Hz

7.4.3 tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ TN-S wala TT

7.4

7.4.5 Power capacity: 48KW

7.5 Kä wïc kɛ kui tɛ̈n yenë kɔc tɔ̈ɔ̈u thïn:

7.5