WP-8000-EX series detects end isolated safety gate (with distribution of electricity), providing isolated current security supply voltage to the transmitter in the site hazardous area, and converting the isolation of (4~20) mA signal generated by the transmitter to the safety zone control system or other unit combination instruments. WP-8000-EX series detects end isolated safety gate (with distribution of electricity), providing isolated current security supply voltage to the transmitter in the site hazardous area, and converting the isolation of (4~20) mA signal generated by the transmitter
Kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ
◆ Karakteristika
●Gäm tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
●Ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
● Aw bɛ se ka (4-20) mA wala (1-5) V signal output, wala DC signal wɛrɛ ye aw fɛ.
● Modular clock design, no need zero point and full adjustment. ● Modular clock design, no need zero point and full adjustment. ● Modular clock design, no need zero point and full adjustment. ● Modular clock design, no need zero point and full adjustment.
● Tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n.
● Input circuit [Exia] IIC, input circuit overload protection.
● Plug-and-pull cable terminal, DIN rail card install.
● Power luɔi
Power cable: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply
Voltage: ((20~30) VDC
Wɛɛr ye cɔl current loss: 24VDC, <50mA (one in one out)
<60mA (ye raan tök looi, ye raan tök looi, ye raan tök looi, ye raan tök looi, ye raan tök looi, ye raan tök looi)
<110mA (binary yic)
Power indicator: LED lighting: green
● Lɔ̈k (Exia IIC risky zone)
Transmitter signal input: (4~20) mA
Voltage distribution of drive transmitter: ≥16VDC (≥22VDC power supply)
Input impedance: 50Ω (one to one out, one to two out);
100Ω (binary yic)
● Signal output (zone de sécurité)
Kɔɔr ye looi: (4 ~ 20) mA
Load ye looi në output: 0 ~ 350Ω (4mA ~ 20mA, 0 ~ 20mA në output)
Voltage output: (1 ~ 5) V
Voltage output impedance: ≤500Ω
Wave (Vp-p): <10mV
● Performance Indicators
Ajuiɛɛr: ±0.5%FS, ±0.2%FS
Tɛmɛ tɛmɛ: ±0.015%/℃
Wakat ye yɛl: ≤1s (10% → 90%)
Waktu tɔ̈u: ≤3s
Lɔ̈ɔ̈m de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de w
Load resistance change effect: ±0.1%/250Ω
Channel isolation: isolation kam input-output-power
Ajuiɛɛr: ≥100MΩ/500VDC (AC)
Capacity of isolation: 2500VAC/1 min 50Hz
Voltage ye dɔɔni: 250VAC
Anti-electromagnetic compatibility: IEC 61000 ye gam
● Parameters ɣän
Tɛmɛ tɛmɛ: (-20 ~ + 60) ℃
Tɛmɛɛr tɔ̈ɔ̈u: (-40 ~ + 80) ℃
Ɣɔ̈ɔ̈r ye cɔl ambient humidity: (5~+95) %RH (no condensation)
● Struktur
Card ye gɔ̈t; Modular clock; ABS ye looi; Terminal ye cɔl plug
Kɔɔr: 110g
● Parameters de gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël
Yïn acï bɛ̈n gam në GB3836.1-2000 ku GB3836.4-2000
Requirements related to standard (Kä ye looi)
Kɔɔr ye cɔl [Exia] IIC
Parameters of security certification: Parameters of security certification: Parameters of security certification: Parameters of security certification: Parameters of security certification: Parameters of security certification: Parameters of security certification:
Um: 250V Uo: 28V Io: 93mA
Po: 0.65W Lo: 2.4 mH Co: 0.03μF
◆ Dimensions
Dimensions: width × height × depth = 16 × 116 × 110 (mm)
