WP-8000-EX series switch volume input isolated safety gate, receive switch from dangerous areas or close switch signals, through safety gate isolation to relay contact output to be transferred to safety zone. WP-8000-EX series switch volume input isolated safety gate, receive switch from dangerous areas or close switch signals, through safety gate isolation to relay contact output to be transferred to safety zone.
Kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ
◆ Karakteristika
● Dry contact switch input.
● Lɔ̈ɔ̈m ye cɔk (NAMUR/DIN 19234)
● Relay switch contact output, wala transistor, TTL level output.
● Kuen ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r.
● Tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n Lɛɛr ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n
● Lɔ̈ɔ̈m de [Exia] IIC.
● Plug-and-pull cable terminals, DIN rail card install.
● Power luɔi
Power cable: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply
Voltage ye kɔɔr: (20~30) VDC
Wɛɛr ye cɔl current loss: 24V DC, <25mA (one in one out)
<50mA (binary yic)
Power indicator: LED lighting: green
● Lɔ̈k (Exia IIC risky zone)
Input switch type: switch, NAMUR type proximity switch
Voltage sensor: 1 kΩ, 4.5V ~ 9.0V
Valve ye waar: 1.5mA
● Signal output (zone de sécurité)
Output channel: relay contact
Relay Features: Response Time: 10ms
Kɔɔr: 24VDC, 2A, ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr
Relay Type: Single Knife Converter Relay
Lëk: Lëk ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc
● Input/output features
Faze normal (reverse phase):
☆ Na Iin > 2.1mA wala Rin < 2KΩ relay contact output ye cɔl stimulated
● Power luɔi
Power cable: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply: independent cable terminal 13-, 14+, can be plugged into the power supply
Voltage ye kɔɔr: (20~30) VDC
Wɛɛr ye cɔl current loss: 24V DC, <25mA (one in one out)
<50mA (binary yic)
Power indicator: LED lighting: green
● Lɔ̈k (Exia IIC risky zone)
Input switch type: switch, NAMUR type proximity switch
Voltage sensor: 1 kΩ, 4.5V ~ 9.0V
Valve ye waar: 1.5mA
● Signal output (zone de sécurité)
Output channel: relay contact
Relay Features: Response Time: 10ms
Kɔɔr: 24VDC, 2A, ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr
Relay Type: Single Knife Converter Relay
Lëk: Lëk ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc
● Input/output features
Faze normal (reverse phase):
☆ Na Iin > 2.1mA wala Rin < 2KΩ relay contact output ye cɔl yellow LED light ye cɔl (cïn cɔl, LED light ye cɔl)
☆ Na Iin < 1.2mA wala Rin > 10KΩ relay contact output ka cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk
Lɔ̈ɔ̈i: 200 μA
● LFD (LFD)
A ye raan ye luɔɔi ye LED red light ye nyuɔɔth ni line ye cɛ̈ɛ̈r, ne line ye cɛ̈ɛ̈r, LED red light ye cɛ̈ɛ̈r, relay ye cɛ̈ɛ̈r. Iin<100μA, Polis dɔ̈ɔ̈r dɔ̈ɔ̈r; Iin>250μA, Rin <100Ω, short circuit alarm; Rin> 360Ω, short circuit will not alarm attention: to use the LFD function, switch contact input must connect two lines to detect resistance. Rin> 360Ω, short circuit will not alarm attention: to use the LFD function, switch contact input must connect two lines to detect resistance. 500Ω ~ 1KΩ ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r; 20KΩ ~ 25KΩ ye tɔ̈ɔ̈u kek switch
● Reverse Phase Setting (User Optional)
● Kuen isolation
Ajuiɛɛr: ≥100MΩ/500V DC (AC)
Capacity of isolation: 2500VAC/1 min 50Hz
Voltage ye dɔɔni: 250VAC
Anti-electromagnetic compatibility: IEC 61000 ye gam
● Parameters ɣän
Tɛmɛɛr luɔi: (-20 ~ + 60) ℃
Tɛmɛɛr tɔ̈ɔ̈u: (-40 ~ + 80) ℃
Humidity: (5~+95) %RH (no condensation)
● Struktur
Card ye gɔ̈t; Modular clock; ABS ye looi; Terminal ye cɔl plug
Kɔɔr: 110g
● Parameters de gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël ye gël
Yïn acï bɛ̈n gam GB3836.1-2000 ku GB3836.4-2000]
Requirements related to standard (Kä ye looi)
Kɔɔr ye cɔl [Exia] IIC
Parameters de gël:
Um: 250V Uo: 11V Io: 15mA
Po: 41.2mW Lo: 10mH Co: 1.4μF
