WP-9000 series passive · DC signal converter (output loop power supply), ye (4 ~ 20) mA signal ye walt ka kɛ DC signal output ye mɔgɔ ye. DCS ye kɔc tɔ̈u në luɔɔi de kɔc ye kɔc tɔ̈u në luɔɔi de kɔc ye kɔc tɔ̈u në luɔɔi de kɔc,
PLC sistem.
Converter kënë ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot
◆ Karakteristika
● Dc current (4 ~ 20) mA signal input to isolation conversion.
● Signal transfer isolation output (4 ~ 20) mA.
● Power supply circuit ((12~28) VDC
● Lɔ̈ɔ̈m de lɔ̈ɔ̈m de lɔ̈ɔ̈m de lɔ̈ɔ̈m de lɔ̈ɔ̈m.
● Plug-and-pull cable terminals, DIN rail card install.
● Power luɔi
Pɛɛi ye looi: (12~28) VDC
● Lɔ̈k signal
Lɔ̈ɔ̈i wɛɛr: (4 ~ 20) mA
● Signal output
Kɔɔr ye looi: (4 ~ 20) mA
Load resistance: ((50 ~ 350) Ω ((4mA ~ 20mA output)
Wave (Vp-p): <10mV
● Performance Indicators
Ajuiɛɛr: ±0.5% FS (ye 100 Ω)
* Note: The load is smaller, the accuracy is higher, and the load increases 100Ω, the accuracy decreases by 0.1%* Note: The load is smaller, the accuracy is higher, the load increases 100Ω, the accuracy decreases by 0.1%* Note: The load is smaller, the accuracy is higher, the load increas
Tɛmɛ tɛmɛ: ±0.015% / ℃
Wakat ye yɛl: ≤1s(10→90)%
Waktu tɔ̈u: ≤3s
Lɔ̈ɔ̈m de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de wɛ̈ɛ̈r de w
Load resistance change effect: ±0.1%/250Ω
Channel isolation: isolation kam input-output-power
Ajuiɛɛr: ≥100MΩ/500VDC (AC)
Capacity of isolation: 1500VAC/1 min 50Hz
Anti-electromagnetic compatibility: IEC 61000 ye gam
● Parameters ɣän
Tɛmɛɛr luɔi: (-20 ~ + 60) ℃
Tɛmɛɛr tɔ̈ɔ̈u: (-40 ~ + 80) ℃
Humidity: (5~+95) %RH (no condensation)
● Struktur
Card ye gɔ̈t; Modular clock; ABS ye looi; Terminal ye cɔl plug
Kɔɔr: 110g
◆ Dimensions
Dimensions: width × height × depth = 16 × 116 × 110 (mm)
